P84325 Image Large
Start with a cold engine and disconnect the battery negative lead. Remove the mass air sensor and air-inlet tube between the throttle body and air cleaner by loosening the worm-gear clamps at each end. Remove the throttle cable from under the throttle-body. The cable snaps onto a ball mount, and it can be carefully pried off with a wide-blade screwdriver. Remove the connections for the throttle position sensor (TPS) and idle solenoid. The plastic connectors snap apart and will plug back in later. Don’t worry about removing the TPS. A new one is included and mounted on the new throttle body.
|
|